Saltar al contenido

Arrendamiento con opción a compra • No necesita crédito perfecto

AudioControl - 2-Channel Active Line Output Converter and Line Driver - Black

AudioControl - Convertidor de línea de salida activo y controlador de línea de 2 canales - Negro

Precio habitual
Precio de venta$90.99 Precio habitual $149.99

Especificaciones

General

BrandAudioControl
Model NumberLC1i
Product Name2-Channel Active Line Output Converter and Line Driver
Product Width4.8 inches
Product Depth1 inches
Product Height3 inches
Product Weight0.55 pounds
Warranty - Parts5 years
Warranty - Labor5 years
All specifications (27)

Key specs

ColorBlack
Effect Type(s)None

Other

Number of Channels2
Surround Sound SupportedNot Applicable
EqualizerNo
High/Low Pass FiltersNone
Audio Only Inputs1 x Phono
Video Only InputsNo video only inputs
Audio/Video InputsNo audio/video inputs
Network Connector(s)No network connectors
Number of HDMI Inputs (Total)0
Number of USB Inputs0
Video Only OutputsNo video only outputs
Audio/Video OutputsNo audio/video outputs
Number of Subwoofer Pre Outs0
Number of HDMI Outputs (Total)0
Remote Control IncludedNo
On-Screen DisplayNo

Características

  • Compatible with most vehicles’ OEM audio systems For use when adding aftermarket amplifiers to car audio systems without RCA preamp outputs or when replacing your vehicle’s factory radio and retaining the factory amplified audio system.
  • 2-channel interface Features one set of active speaker-level inputs, one set of line-level inputs, and one set of line-level outputs for integration with your existing audio system.
  • Built-in line driver Provides optimal preamp signal when an aftermarket head unit is installed.
  • Turn-on trigger mode switch Choose between GTO Signal Sense (DC offset) and audio sense to automatically power the line output converter or use remote 12V input for manual control.
  • Single variable stereo gain control with clipping indicator Allows you to adjust the output signal from -12dB to +12dB and indicates signal clipping when gain is set to high.
  • Selectable on-board load resistors Including 20 ohms, 60 ohms, and 20k ohms impedance for newer factory-amplified vehicles.
  • 400W (40V) peak power input per channel @ 20k ohms For high-quality sound.
  • 9.5V RMS (13V peak) maximum output voltage @ 14.4V For efficient operation.
  • Selectable ground isolation Choose from common, ISO (default), or 200 ohms.
  • 20Hz - 50kHz frequency response Ensures faithful sound reproduction.
  • >110dBA signal-to-noise ratio Enjoy crisp audio.
  • <0.01% Total Harmonic Distortion (THD) For clean sound.

Reseñas de clientes

4.8

out of 5

38 customer reviews

Most recent 10 reviews

  • Did the job

    It does its job very well and has lasted me way longer than my previous loc. It’s the perfect size to fit almost anywhere in any car, plus where the wires get inserted at can be takenout which is very nice and made the whole process alot faster. It’s especially nice if you have a small car that has little to no room behind the headunit or under the glovebox cause itll fit near anywhere in the car. My only con about it is that i have to either make a mount or get some velcro to attach it somewhere, cause i dont want to drill holes into my car to mount it. But id say this is very much worth it.

    Thetoasterunderyourbed

  • Highly recommend

    Very good product good connection and very good controls

    BRENDANW

  • Great product

    Was everything i needed and worked awesome. Sounds great

    CHARLIEMOSELEY

  • Amplifier

    Too complicated no instructions in package, returned

    MikeG

  • Audiocontrol

    Lc1 got this to put in my chrysler 300s with beats audio. Works great.

    Joab30

  • Bang for your buck yes, but lci 2 is better

    Great for strictly STOCK headunits (wanting to add an amp/sub to a stock aka factory headunit). The procuct runs well, is compact enough to not get in the way or tuck somewhere (if you can run wires properly). I would definitely reccomend the lci 2 more so though because its more ”future proof” incase you want to upgrade your system in the future. With this one your limited to one set of rcas which means... ull have to use a splitter if worst comes to worst and you wanna add another set of rcas... dont do that! Go with the lci 2 unless your ballin on a budget and have no other choice but this…

    DMT6636

  • Awesome

    Works better than i imagined wasnt real sure if this was going to help with what i needed but it did and them some

    Alchemist

  • Good

    Good would buy again if I had too pushed hard sounds good

    JamieS

  • Wow

    Wow makes my sound system sound incredible. Im amazed by the sound and great quality.

    Chief

  • Perfect for Tesla

    Works great for the application. Currently installed in a Tesla Model 3 running a taramps 3k on 2 12s. That in itself makes it worth the purchase. Senses input and will automatically turn off and on the amp which makes ease of access even better. Highly recommend for stock applications when adding subwoofers.

    CameronG

Las calificaciones y reseñas las proporciona nuestro socio.